Richter BVIP/F Series Ball Valves (ISO/DIN) Manuel d'utilisateur télécharger pdf (Page 9)

Series BVI/F, BVIP/F Page 9

9520-090-en Revision 10

TM 8361 Edition 10/2011

6 Installation

 Examine valve for in-transit damage, damaged ball

valves must not be installed.

 Before installation the valve and the connecting

pipe must be carefully cleaned to remove any dirt,

especially hard foreign matter.

 During installation, pay attention to the correct

tightening torque, aligned pipes and tension-free

assembly.

Ensure that a remotely actuated actuator

cannot be accidentally switched on.

6.1 Flange caps and gaskets

 Leave protective caps on the flanges until just prior

to installation.

Where there is a particularly high risk of damage to

the plastic sealing surfaces, e.g. if the mating flanges

are made of metal or enamel, PTFE-lined gaskets

with a metal inlay should be used. These gaskets are

available as special accessories in the Richter range.

6.2 Grounding

The valve must be grounded. The simplest solution is

to use tooth lock washers which are placed under one

pipe bolt of each flange.

Otherwise grounding must be ensured by different

measures e.g. a cable link.

At the customer's request a setscrew M6 with a hex.

nut and washer will be provided at each flange as an

additional grounding connection.

Ball/stem unit 201 and stem 202 are grounded using a

grounding spring washer 557.

6.3 Direction of flow and

installation position

Installation is independent of the direction of flow.

Any installation position can be chosen.

Otherwise, it is marked by a direction arrow on the ball

valve, in the case of an additional relief bore in the

ball/stem unit or the ceramic ball.

Fig. 1 Ball Al

in closed position

Fig. 2 Ball/stem unit in closed position

6.4 Test pressure

The test pressure PT of an open valve must not

exceed the value of 1.5 x PS(PN) as per the

identification of the valve.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 24 25

Commentaires sur ces manuels

Pas de commentaire

Richter BVIP/F Series Ball Valves (ISO/DIN) Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour l'eau Richter BVIP/F Series Ball Valves (ISO/DIN)